Reflex Recommended Power Supplies

To use 3rd party power supplies, the Reflex lighthead and Reflex battery each require USB Type C (USB-C) power supplies which adhere to the Universal Serial Bus Power Delivery Specification Revision 1.0 (USB PD 1.0).

StellaPro Reflex lightheads are designed for use with a 100W rated E-Mark USB-C power cables such as included with the StellaPro Reflex. We recommend using our cables which are available in half meter and 3-meter lengths.

The general performance with a given USB-C supply power rating is described in the chart below:

 USB-C Power Supply <=15W 25W 45W 65W 100W
Reflex Lighthead Not Recommended Not Recommended 4,000 Lumens, Burst 8000 Lumens 6,000 Lumens, Burst 12,000 Lumens 9,000 Lumens, Burst 18,000 Lumens
Reflex 38Wh Battery 6-10Hr charge time 4Hr charge time 2Hr charge time
2Hr charge time
2Hr charge time

In addition, we have found that some off-brand USB-C power supplies may not actually meet their claimed power ratings over sustained continuous operation, and/or may not work reliably. 

Recommended USB-C supply AC adapters:

EHO 100W USB-C Wall Charger with PPS (White)

EHO 100W USB-C Wall Charger with PPS (Black)

hyppr 100W USB-C Wall Charger

GMM 100W USB-C Wall Charger

 Spigen 100W USB-C Wall Charger

Recommended USB-C Battery-Based supply:

Omni 100W 20c+

Tether Tools ONsite USB-C 100W PD Battery Pack (Best for Continuous Light; Burst at single shot speeds)

Easylonger 100W USB-C Battery (Best for Continuous Light; Burst at single shot speeds)

Recommended D-Tap to USB-C supply:

ONsite D-Tap to USB-C PD Adapter

*Note: Please ensure your D-Tap port is capable of providing 90 Watts of power.